|
|
Replica Design of L-40 "Meta Sokol " Airctaft - fuselage
Růžička, Miroslav ; Pešák, Miroslav (referee) ; Píštěk, Antonín (advisor)
This diploma thesis deals with the design of all-metal construction of fuselage of the replica L-40 Meta Sokol aircraft on the basis of CS-VLA regulation. As far as the aircraft is concerned, the thesis establishes the load of tail surfaces, landing gear and engine bed. Futhermore, it designs the construction of fuselage, tail landing gear, including the system of its retraction, wing-fuselage connection, engine bed and the primary design of cockpit. In the end, the thesis focuses on the fuselage production technology.
|
|
|
Design of composite aeroplane wing-fuselage joint
Sadovský, Hynek ; Šplíchal, Jan (referee) ; Juračka, Jaroslav (advisor)
This master's thesis deals with design, strength calculation and technological solution of wing-fuselage joint for composite four-seater aeroplane certificated by CS-23. Design is focused on optimal space utilization, low weight and simple manufacturing and assembly. Main output is technical documentation consisting of drawings and technological lay-ups. Conceptual design was chosen after analysis and weight estimation. With strenght calculation for composite materials it was possible to design composition of primary parts and also specify manufacture processes. Assigment was solved by unusuall conceptual design, which claims higher precision manufacturing, but it saves weight.
|
|
|
Construction parts and Elements of the of Large transport aircraft Fuselage structure
Zubaľ, Filip ; Dubnický, Lukáš (referee) ; Juračka, Jaroslav (advisor)
Fuselage design is an area of aerospace engineering that combines aerodynamics with mechanical and material engineering. Many factors affect the construction and design of the fuselage. The bachelor thesis is focused on the processing and systematic ordering of individual structural units used in large transport aircraft. It points out the diversity of individual structural nodes in the design of the aircraft. The work is divided according to sections of the fuselage, where the specific design solutions for the node are then discussed. At the end of the work, I present a comparison of the two most famous competing aircraft models of Airbus and Boeing company. I pointed out the individual combinations of structural elements. Compared data are processed using tables and schematic figures. The bachelor thesis was also translated into a form of presentation intended for educational purposes.
|
|
|
Reconstruction of middle part of the fuselage Z 143 aircraft using semi- monocoque frame
Zamazal, Jakub ; Mališ, Michal (referee) ; Píštěk, Antonín (advisor)
The thesis is focused on reconstruction of middle part of fuselage Z 143 aircraft from truss frame to semi-monocoque frame. In the thesis there is a conceptual design of semi-monocoque middle part of fuselage. The spars of centre wing section are strength controlled. In thesis there is weight analysis according to use the semi-monocoque middle part of fuselage. In second half of the thesis there is a study of retractable landing gear. The thesis shows weight savings according to use a semi-monocoque frame. The thesis also shows that semi-monocoque frame allows other option to upgrade Z 143 aircraft. This thesis can serve as a feasibility study of the reconstruction of the middle part of the fuselage Z 143 aircraft.
|
|
| |
|
|
Fusalage and Tail of Competition Model Airplane
Kminiaková, Tatiana ; Hájek, Tomáš (referee) ; Janhuba, Luboš (advisor)
This bachelor’s thesis deals with empennage and fuselage design of new aircraft for design competition SAE Aero Design East 2020. The introduction is focused on regulations of this competiton and their subsequent analysis. The research part of the thesis takes in consideration possible configurations of the empennage and fuselage and their basic parameters. The most suitable configurations are compared and basic stability and load calculations are done. In the last part structural design is completed.
|
|
|
Design of competition model fuselage
Bednář, Peter ; Löffelmann, František (referee) ; Hájek, Tomáš (advisor)
This bachelor’s thesis deals with the design of the fuselage of the competing model aircraft. The introduction describes the student team, Chicken Wings, and also explains the upcoming Air Cargo Challenge 2019. Furthermore, the search section lists the individual types of materials and carbon composite manufacturing technologies. The second part of the thesis deals with the individual phases of the aircraft design and the definition of fuselage. Moreover, the practical part of the thesis begins with a statistical overview of mass-produced models F3B and F5J categories and the subsequent design of the individual parts of the fuselage and the mass analysis of the model. The conclusion justifies the choice of individual parameters.
|
|
| |
|
|
Design of Trainer Aircraft with Tandem Seats
Dycka, Jan ; Urík, Tomáš (referee) ; Juračka, Jaroslav (advisor)
The diploma thesis deals with the project of composite constuction of aeroplane VUT 001 Marabu and its FEM stress-deformation analysis. The project of pilt´s cockpit is solved in the light of basic ergonomic requirements. Mass analysis, calculation and resulting selection of conclusive events of load are parts of the work. The results are applied on FEM model of fuselage and the state of stress in individual sections of composite structure are determined by the MSC Patran/Nastran system.
|
|
|
Structural design of fuselage and tail for racing model
Skála, Adam ; Hájek, Tomáš (referee) ; Pejchar, Jan (advisor)
This bachelor’s thesis surveys fuselage and empennage improvement of an already existing competition aircraft FabricK. Firstly, the introductory part explains the Air Cargo Challenge contest and describes the model. A research then presents possible empennage designs, which is followed by a brief overview of production F3B aircraft. The practical part of thesis introduces construction project of the empennage and the fuselage as well as a weight distribution analysis. Finally, the concluding part will evaluate the imporvement.
|
guest ::
